| New UWB BPF with Steep Selectivity Based on T-Resonator and Capacitively Coupled λ/4 and λ/2 Line Sections |
|
Thai Hoa Duong, Ihn-Seok Kim |
|
College of Electronics & Information, Kyunghee University |
|
|
|
|
| Abstract |
|
In this paper, two new circuit structures for European and U.S. ultra-wide band(UWB) bandpass filters(BPFs) with sharp roll-off characteristics are introduced. We show first that the ultra-wide bandpass property is obtained from a $lambda$/4 open T resonator with a capacitively coupled $lambda$/4 short-circuited line, which provides two attenuation poles at lower and upper cutoff frequencies. Then, two identical capacitively coupled input/output lines, which can be $lambda$/4-length open ends or $lambda$/2-length short ends, with the T-resonator, are adopted to suppress lower and higher frequency components outside of the pass band. There is coupling between the input and output lines providing two additional transmission zeros in the lower and upper transition bands of the filter. Since the coupling between the T-resonator with the $lambda$/4 short-circuited line and the input/output lines limits the bandwidth of the filter to the European UWB band, both the $lambda$/4 short-circuited line and the input/output lines are inserted between the two stacked T-resonators for the U.S. UWB band. The filter structures are simulated with ADS and HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. |
| Key words:
Ultra-Wide Band, BPF, Odd Mode Resonator, T-Resonator, Capacitively Coupled |
|
PDF Links
Full text via DOI
Download Citation
