J Korean inst Electromagn Sci Search


Journal of the Korean Institute of Electromagnetic and Science 2001;1(1):95-99.
A Study on Fabrication and Evaluation of Ferrite Electromagnetic Wave Absorber
Dong-Il Kim1, Jae-Young Bae1, June-Young Son1, Young-Soo Won2, Jae-Man Song3
1Dept. of Radio Sciences & Engineering, Korea Maritime Univ
2Dept. of Electronics & Engineering, Korea Maritime Univ
3Research Institute of Industrial Technology, Korea Maritime Univ
According to the progress of the electronic industy and radio communication technologies, mankind might enjoy its abundant life On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organiztions such as CISPR, FCC, ANSl,etc. have provided the standard of electromagnetic wave enviroment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurment. From November of 1998, however, the CISPRll has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurementent$^{[1]}$ . In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futheremore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.


Browse all articles >

Editorial Office
#706 Totoo Valley, 217 Saechang-ro, Yongsan-gu, Seoul 04376, Korea
Tel: +82-2-337-9666    Fax: +82-2-6390-7550    E-mail: admin-jees@kiees.or.kr                

Copyright © 2019 by The Korean Institute of Electromagnetic Engineering and Science. All rights reserved.

Developed in M2community

Close layer
prev next