J Korean inst Electromagn Sci Search


Journal of the Korean Institute of Electromagnetic and Science 2004;4(3):113-118.
A New Measurement Technique on Inherent-Ring-Resonance Frequency and Effective Loss-Tangent using Ring Filters
Hee-Ran Ahn, Kwyro Lee
Division of EE(Electrical Engineering), Dept. of EECS(Electrical Engineering Computer Science) and MICROS Research Center, KAIST
As an application of ring filters, a new and simple method to determine an inherent-ring-resonance frequency is introduced. The ring filter consists of a ring and two short stubs. They are connected at 90$^{circ}$ and 270$^{circ}$ points of the ring and the ring filter may be seen in such way that two filters are connected in parallel. Therefore, if the two powers of the two filters are out-of-phase at the output, the power excited at the input can not be delivered. That can be done by making difference in length of the two short stubs, and when a certain condition is satisfied, a frequency exists where all the excited power is reflected. That is the very inherent-ring-resonance frequency. In the lossless case, the return loss with the condition reaches 0 dB at the inherent-ring-resonance frequency but does not with conductor, dielectric losses and so on. Therefore, the effective loss tangent at a frequency of interest may be obtained correctly. To verify the method, two ring filters have been fabricated in microstrip lines and the measured results show good agreement with the predicted ones.
Key words: Ring Resonance Frequency, New Measurement Technique on Inherent-Ring-Resonance Frequency, Effective Loss-Tangent
Share :
Facebook Twitter Linked In Google+
METRICS Graph View
  • 213 View
  • 0 Download
Related articles in JEES


Browse all articles >

Editorial Office
#706 Totoo Valley, 217 Saechang-ro, Yongsan-gu, Seoul 04376, Korea
Tel: +82-2-337-9666    Fax: +82-2-6390-7550    E-mail: admin-jees@kiees.or.kr                

Copyright © 2019 by The Korean Institute of Electromagnetic Engineering and Science. All rights reserved.

Developed in M2community

Close layer
prev next