J Electromagn Eng Sci Search

CLOSE


J Electromagn Eng Sci > Volume 17(1); 2017 > Article
Journal of Electromagnetic Engineering and Science 2017;17(1):44-50.
DOI: https://doi.org/10.5515/JKIEES.2017.17.1.44   
Design of a Pot-Shaped Monopole Antenna with Dual Band Notched Characteristics for UWB Application
Kwang Yun Mok1, Young Chul Rhee1, Joong Han Yoon2
1Department of Information and Communication Engineering, Kyungnam University
2Department of Electronics Engineering, Silla University
Correspondence:  Joong Han Yoon,Email: jhyoon@silla.ac.kr
Abstract
A compact planar microstrip-fed ultra-wideband (UWB) antenna with a dual band-notched for UWB application is presented and analyzed. By inserting a U-shaped slot and inverted U-shaped slot into the pot-shaped radiator, two notched bands are achieved. By optimizing the width and length of the U-shaped slots and inverted U-shaped slot, a desired bandwidth of voltage standing wave ratio (VSWR) less than 2.0 can be achieved, ranging from UWB bands with notched dual bands. The proposed antenna is fabricated on an inexpensive FR-4 substrate with overall dimensions of $28.0mm{times}39.5mm$. The measured results confirm that the proposed antenna covers from 1.775 to over 13.075 GHz with two rejection bands of around 3.325-3.925 GHz and 5.3125-6.025 GHz. In addition, the proposed antenna showed good radiation characteristics and gains in the UWB bands.
Key words: Dual Band Notched, Pot-Shaped Model, U-Shaped Slot and Inverted U-Shaped Slot, UWB Application

ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
AUTHOR INFORMATION
Editorial Office
#706 Totoo Valley, 217 Saechang-ro, Yongsan-gu, Seoul 04376, Korea
Tel: +82-2-337-9666    Fax: +82-2-6390-7550    E-mail: admin-jees@kiees.or.kr                

Copyright © 2018 by The Korean Institute of Electromagnetic Engineering and Science. All rights reserved.

Developed in M2community

Close layer
prev next