| Ring Filters and Small-Sized Wideband Ring Filters |
|
Hee-Ran Ahn, Noh-Hoon Myung |
|
Division of Electrical Engineering, Dept of EECS, KAIST |
|
|
|
|
| Abstract |
|
A ring filter is proposed as a wide-banded filter. It consists of a ring and two short stubs, which are connected at 90$^{circ}$ and 270$^{circ}$ points of the ring. Since the termination impedance at 90$^{circ}$ and 270$^{circ}$ points of the ring and the characteristic impedance of the short stub have an effect on designing of it, the relation between them and bandwidths has been studied. Based on the study, two types of small-sized wideband CVT(constant VSWR-type impedance transformer)- and CCT(constant conductance-type impedance transformer)-ring filters are introduced, designed, simulated and one of two, a CCT -ring filter, is tested. The circumference of the ring can be reduced theoretically up to 60$^{circ}$ and two of many cases having about 300$^{circ}$ circumferences are simulated. The simulated results show more than 100 % fractional bandwidth, which can be obtained with more than 5 stages in conventional filter-design techniques. To test the designed CCT-ring filter, it has been fabricated in microstrip technology and the measured results show good agreement with the simulated ones, having more than 100 % fractional bandwidth. |
| Key words:
Ring Filters, Small-Sized Wideband Ring Filters, Small-Sized Impedance Transformers(CCVTs and CCTs) |
|
PDF Links
Full text via DOI
Download Citation
